HTM-2000G強力精密銑床

2024-04-07

詳細介紹：

HT-2000G強力精密銑床(圖1)

	機械規格Speification	HT-2000D-700V/750V/900V/1000V	HT- 2000D- 700S/750S/900S/1000S
主軸 Main Spindle	立銑回轉速度 Vetical spindle speed	60~4000rpm無段變速	75~ 3600rpm 16段變速
	端孔斜度Spindle taper	NT #40	NT #40
	左右傾斜角度 Swivel angle of head	45° (L&R)	45° (L&R)
	伸出臂行程Overarm travel	550mm	550mm
	升降套行程Quill travel	140mm	140mm
	立銑主軸端至工作臺面距離 Distance of vertical spindle to table	190~580mm	190~580mm
	立銑主軸中心至機身距離 Distance of vertical spindle center to column surface	140~ 750mm	140~ 750mm
	主軸自動押送速度 Quill fed per revolution of spindle	0.035/0.07/0.14mm(每轉一圈)	0.035/0.07/0. 14mm(每轉-圈)
工作臺 Table	工作臺尺寸(長x寬) Working table area (LxW)	1250 x 290/1400 x 305mm	1250 x 290/1400 x 305mm
	左右行程 Longitudinal travel manua/auto	700mm /750mm/900mm/1000mm	700mm /750mm/900mm/1000mm
	前后行程Cross travel	400mm	400mm
	升降行程Vertical travel of knee	400mm	400mm
	T型槽(寬x槽數x間距)T-slots	16x3 x 63.5mm	16x 3 x 63.5mm
	左右自動押送速度 Cutting federate (X)	0 ~1500mm/min	0 ~1500mm/min
	左右快速押送速度 Rapid traverse (X)	3000mm/min	3000mm/min
	升降快速押送 Table elevating speed	1150mm/ min	1150mm/ min
電動機 Motor	立銑主軸Vertical main spindle	3.7kw (5HP)AC變頻馬達	3.7kw (5HP)
	升降座Table elevating	0.75kw (1HP)	0.75kw (1HP)
	潤滑泵浦Lubricating pump	150w	150w
	電磁泵浦Electromagnetic pump	40w	40w
機械重量及包裝 Machine Weight & Packing	外觀尺寸 Machine measurement (LxWxH)	2100 x 2100 x 2500mm	2100x 2100 x 2480mm
	裝箱尺寸 Packing measurement (LxWxH)	2270 x 1850x 2200mm	2270 x 1850 x 2200mm
	凈重Net weigh	1905kgs	1881kgs
	毛重Cross weight	2055kgs	2031kgs